SF1093A 175 mhz saw filter rf monolithics, inc. phone: +1(972 )233-2903 european sales office 4347 sigma road fax: +1(972 )387-8148 44 19 63 2 51 383 dallas, texas 75244 e-mail: info@rfm.com 44 196 3 25 15 10 usa home page : www.rfm.com SF1093A 7/14/1999 r electrical connections connection terminals port 1 hot 2 port 1 gnd return 3 port 2 hot 8 port 2 gnd return 9 case ground all others absolute maximum ratings rating value units maximum incident power in passband +10 dbm max . dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c max soldering profile 265 c for 10 s designed for gsm bts transmitter applications low insertion loss excellent size-to-performance ratio hermetic 13.3 x 6.5 mm surface-mount case unbalanced inp ut and output characteristic sym min typ max units notes nominal center frequency fc 175.000 mhz il 8 9.0 db 1 bw 2 330 460 khz 0.5 1.0 db p - p gdv <200 260 ns p-p passband insertion loss at fc 2 db passband amplitude ripple (peak to adjacent valley) amplitude variation over fc 200 khz group delay variation over fc 300 khz absolute group delay gd 1.3 1.5 m s 1, 2 5 17 30 rejection fc -0.9 to fc -0.6 and fc +0.6 to fc +0.9 mhz fc -1.2 to fc -0.9 and fc +0.9 to fc +1.2 mhz fc -6.0 to fc -1.2 and fc +1.2 to fc +6.0 mhz fc -155 to fc ?6.0 and fc +6.0 to fc +125 mhz 50 db 1, 2, 3 operating temperature range t a -5 +70 c 1 impedance matching to 50 w unbalanced external l-c case style sm13365-12 13.3 x 6.5 mm nominal footprint lid symbolization (yy = year, ww = week) rfm SF1093A yyww notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is dependent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. ?lrip? or ?l? after the part number indicates ?low rate initial production? and ?eng? or ?e? indicates ?engineering prototypes.? 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. 8. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 9. ? copyright 1999, rf monolithics inc . 10. electrostatic sensitive device. observe precautions for handling.
SF1093A 175 mhz saw filter rf monolithics, inc. phone: +1(972)233-2903 european sales office 4347 sigma road fax: +1(972)387-8148 44 196 3 25 1 38 3 dallas, texas 75244 e-mail: info@rfm.co m 44 1 963 25 1 51 0 usa home page : www.rfm.com SF1093Ap.doc 400 khz/div 50 ns/div 0 db -20 -40 -60 -80 -100 0 db -2 -4 -6 -8 -10 3 mhz/div
rf monolithics, inc. phone: +1(972) 233-2903 fax: +1(972) 387-8148 e-mail: info@rfm.com rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo and rfm are registered trademarks of rf monolithics, inc. sm13365-12 052400 sm13365-12 case dimension mm inches min nom max min nom max a 13.08 13.31 13.60 0.515 0.524 0.535 b 6.27 6.50 6.80 0.247 0.256 0.268 c 1.91 2.00 0.075 0.079 d 1.50 0.059 e 0.79 0.031 h 1.0 0.039 p 2.54 0.100 connection terminals port 1 input or return 2 return or input 3 port 2 output or return 8 return or output 9 ground all others single ended operation return is ground differential operation return is hot 12-terminal ceramic surface-mount case 13.3 x 6.5 mm nominal footprint c h p (8 places) e (10 places) d b a 4 5 6 7 1 12 11 10 3 9 8 2 top view bottom view 2 3 8 9 1 12 11 10 4 5 6 7 electrical connections case dimensions
2u874 scale sheet of a fscm no. size dwg no. rev none w/o or ecn SF1093A-demo a 1 2 6797 p ar t identifier description 1 description 2 qty/assy reference description SF1093A-demo demo board,SF1093A SF1093A-000 assy diagram,demo board SF1093A 0 400-1412-001 pcb, demo, 13mm, type 2 1.0000 pcb 500-0003-270 cap,chip,npo,27(j),std 1.0000 c 1 500-0003-330 cap,chip,npo,33(j),std 1.0000 c 2 500-0248-001 conn,coax,flange mt.jack 4 hole 2.0000 j 1,2 500-0010-150 ind,chip,1008cs,15nh,10% 2.0000 l 1,4 500-0010-047 ind,chip,1008cs,4.7nh,10% 2.0000 l 2,3 bill of materials
2u874 scale sheet of a fscm no. size dwg no. rev none w/o or ecn SF1093A-demo a 2 2 6797 rev ecn date description a 6797 06/24/98 initial release rev history
|
